After changes save and then load the script on the main pc, you don't need it on the second pc. Because every key will be sent to the second pc as necessary.
Code: Select all
// ----------------------------------------------------------------------------
// Script Name: Lord of the Rings Online
//---------------------------------------------------------------------------------------------------------------------------------------
// PRESS Shift Oem3 TO LAUNCH LOTRO CLINT ON TWO PC'S
//
//
// NOTE: CHANGE IP ADDRESS TO MATCH YOUR OWN SECOND PCS IP ADDRESS.
// NOTE: CHANGE THE LOCATION WHERE YOU HAVE THE LOTRO EXE. FOLDER.
// TIP: LOTRO WILL PERFORM FASTER IF YOU HAVE IT INSTALLED ON A DRIVE OTHER THEN THE DRIVE YOU HAVE YOUR OPERATING SYSTEM INSTALLED ON.
//---------------------------------------------------------------------------------------------------------------------------------------
<Hotkey Shift Oem3>
<SendPC Local>
<Run "F:\The Lord of the Rings Online\TurbineLauncher.exe">
<SendPC 192.168.1.104>
<Run "C:\Program Files\Turbine\The Lord of the Rings Online\TurbineLauncher.exe">
//-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
//THIS WILL ENTER THE PASSWORD FOR EACH INDIVIDUAL ACCOUNT AND RENAME EACH WINDOW.
// AND YOU NEED TO CHANGE THE THE MOUSE LOCATION FOR EACH PC WINDOW( WHEN THE CHARACTOR SCREEN COMES UP GET THE LOCATION OF THE LOGIN BUTTON ON THE SCREEN FOR BOTH PCS.)
// REPLACE MY SCREEN LOCATIONS WITH YOURS.
//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
<SendPC local>
<Wait 15000>
<SendWin "The Lord of the Rings Online™">
<Text Password>
<Wait 1000>
<Key Enter>
<Wait 2000>
<Key Tab>
<Wait 2000>
<Key Enter>
<Wait 10000>
<RenameWin "The Lord of the Rings Online™: Rise of Isengard™" Lotro1>
<Wait 10000>
<Key Esc>
<Wait 2000>
<Key Esc>
<Wait 11000>
<SendWin Lotro1>
<ClickMouse LButton Window 1441 810>
<Wait 3000>
<Key Enter>
<SendPC 192.168.1.104>
<Wait 15000>
<SendWin "The Lord of the Rings Online™">
<Text Password>
<Wait 1000>
<Key Enter>
<Wait 2000>
<Key Tab>
<Wait 2000>
<Key Enter>
<Wait 12000>
<RenameWin "The Lord of the Rings Online™: Rise of Isengard™" Lotro2>
<Wait 9000>
<Key Esc>
<Wait 2000>
<Key Esc>
<Wait 11000>
<SendWin Lotro2>
<ClickMouse LButton Window 1078 635>
<Wait 4000>
<Key Enter>
//---------------------------------------------------------~
// MAILING LABELS
//---------------------------------------------------------
<Label Ring1 Local SendWin Lotro1>
<Label Ring2 192.168.1.104 SendWin Lotro2>
//-----------------------------------------------------------
// DEFINE HOTKEYS FOR ALL KEY COMBINATIONS THAT WILL GET
// SENT TO BOTH WINDOWS. ADD MORE KEY COMBO'S IF YOU WANT.
//-----------------------------------------------------------
<Hotkey ScrollLockOn 0-9, Plus, Minus, F1-F11; ScrollLockOn SHIFT 0-9, Plus, Minus, F1-F11, NumpadHome, NumpadUp, NumpadPgUp, NumpadLeft, Clear, NumpadRight, NumpadEnd, NumpadDown, NumpadPgDn; ScrollLockOn CTRL 0-9, Plus, Minus, F1-F11; ScrollLockOn ALT 0-9, Plus, Minus, F1-F11>
<PassThrough>
<SendLabel Ring2>
<Key %Trigger%>
//--------------------------------------------------------------------------------------------------------
// DEFINE MOVEMENT KEYS THAT WILL GET SENT TO BOTH WINDOW'S.
// ADD MORE KEYS IF YOU WANT. IF CAPS ON BOTH TOONS WILL MOVE THE SAME.
// HERE I DISABLED THE SEND FUNCTION TO THE SECOND TOON. BY USING // TAGS.
// IF YOU WANT TO ENABLE THE MOVEMENT FUNCTION TO THE SECOND TOON DELETE THE // TAGS BELOW '3RD LINE DOWN'
//--------------------------------------------------------------------------------------------------------
<MovementHotkey w, s, a, d>
<PassThrough>
// <SendLabel Ring2>
<Key %Trigger%>
<MovementHotkey 0-9, Minus, Plus, F10, B-C, E-G, I-R, T-V, Y-Z, Period, Shift>
<PassThrough>
<SendLabel Ring2>
<Key %Trigger%>
//-----------------------------------------------------------------------------
// BOTH TOONS WILL JUMP TOGETHER, BUT THE SECOND TOON WILL REFOLLOW AFTER JUMP.
//-----------------------------------------------------------------------------
<Hotkey Space>
<PassThrough>
<SendLabel Ring2>
<Wait 2000>
<Key Space w >
<Key F2>
<Wait 1000>
<Text /follow>
<Wait 1000>
<Key Enter>
//------------------------------------------------------------------------------------------------------------------------------------------
// SECOND TOON WILL AUTOFOLLOW, TARGET MAIN TOON, THEN SELECT DEAD TARGET AND LOOT.
// MUST BE CLOSE ENOUGH FOR SECOND TOON TO LOOT. IF SECOND TOON IS AT A DISTANCE SELECET OEM3 AGAIN WHEN SECOND TOON GETS CLOSE TO DEAD NPC.
//------------------------------------------------------------------------------------------------------------------------------------------
<Hotkey Oem3>
<SendLabel Ring2>
<Key F10>
<Wait 300>
<Key U>
<Wait 1000>
<Key F2>
<Wait 2000>
<Text /follow>
<Wait 1000>
<Key Enter>
//-------------------------------------------------------------------------------------------------------------------------------------
// THIS HOTKEY TAB WILL ENABLE BOTH TOONS TO SELECT NEAREST FOE OR NPC. BEFORE ATTACK.
// NOTE: I HAVE ASSIT WINDOW SELECTED ON MY MAIN FOR MY SECOND TOON. THIS WILL HELP MAKE SURE BOTH TOONS ARE SELECTING THE SAME TARGET.
//-------------------------------------------------------------------------------------------------------------------------------------
<Hotkey Tab>
<PassThrough>
<SendLabel Ring2>
<Key F10>
//---------------------------------------------------------------------------------------------
// THIS KEY WILL SELECT OBJECTS INGAME EXAMPLE: PLANTS FOR QUESTS, BACKBACKS, ITEMS FOR QUESTS.
// NOTE: YOUR MAIN TOON WILL GO FIRST FOLLOWED BY YOUR SECOND TOON.
//---------------------------------------------------------------------------------------------
<HotKey Delete>
<SendLabel Ring1>
<Key Delete>
<Key U>
<SendLabel Ring2>
<Key Delete>
<Wait 3000>
<Key Delete>
<Wait 1000>
<Key u>
<Wait 4000>
<Key F2>
<Wait 1000>
<Text /follow>
<Wait 1000>
<Key Enter>
//----------------------------------------------------------------------------------------
// JUST PLAIN FOLLOW IF YOU HAVE NOTHEN TO SELECT.
// NOTE: IF YOUR NOT FIGHTING ANY NPC'S NO POINT IN ADDING ANY EXTRA STEPS FOR FOLLOWING.
//----------------------------------------------------------------------------------------
<HotKey X>
<SendLabel Ring2>
<Key F2>
<Wait 300>
<Text /Follow>
<Wait 300>
<Key Enter>
//-----------------------------------------------------------------------------------------------------
// I USED THIS ACTION TO SELECT MY SECOND TOON TO CAST DEED SKILLS.
// KEY 5 IS MY MAIN QUICKSLOT BAR USING SLOT 5.
// NOTE: F2 SELECTS YOUR MAIN TOON FOR SKILL DEEDS I USE THIS FOR CAPTIAN BUFFS.
// ALSO, RING2 IS DISABLED BELOW (THIRD, FORTH LINE DOWN), BECAUSE I USED MY MAIN TOON TO BUFF MY SECOND TOON.
// SO YOU CAN SWITCH BACK AND FORTH OR HAVE BOTH TOONS BUFFING EACHOTHER.
//-----------------------------------------------------------------------------------------------------
<HotKey BrowserBack>
<SendLabel Ring1>
<Key F2>
// <SendLabel Ring2>
// <Key F3>
<Wait 200>
<Key 5>
//------------------------------------------------------------------------------
// JUST CHANGE DELETE H IN KEY BINDINGS. IT WILL BE USED FOR DIS/MOUNTING HORSE.
// JUST ADD YOUR HORSE IN ANY QUICKSLOT BAR. I USED QUICKSLOT BAR 3 SLOT 3.
//------------------------------------------------------------------------------
<HotKey H>
<PassThrough>
<SendLabel Ring2>
<Key Shift 3>
<Wait 200>
<Text / follow>
<Wait 100>
< Key Enter>
//-----------------------------------------------------------------------------------------------------------
// FELLOWSHIP MANUEVER - STRAIGHT
// NOTE: USING BOTH UP (RED), DOWN (YELLOW), LEFT (BLUE), RIGHT (GREEN) ARROWS FOR SOLID FELLOWSHIP MANUEVER.
// CHANGE FELLOWSHIP KEY BINDINGS IN KEY BINDINGS OF LOTRO OPTIONS.
//-----------------------------------------------------------------------------------------------------------
<Hotkey HotKey Up, Down, Left, Right>
<if MainWin is Ring1>
<SendLabel Ring2>
<Key Clear>
<SendLabel Ring1, Ring2>
<Wait 300>
<Key %Trigger%>
<endif>
